A² Spoody Hollow: Hollow Awakens 4-Piece Enclosure Set

A² Spoody Hollow — The Hollow Awakens

Turn your jumping spider enclosure into a miniature haunted woodland with The Hollow Awakens, a limited-release four-piece set from the A² Spoody Hollow collection.

The four pieces were designed as one coordinated enclosure scene, combining a magnetic wall-mounted hide with three freestanding floor pieces.

This collection is sold only as the complete four-piece set. There are no substitutions, individual-piece sales, or mix-and-match options.

THE SET INCLUDES

Jack-o’-Root Hide — Wall Mounted
60.6 mm wide × 50.6 mm deep × 70 mm high

A rooted jack-o’-lantern hide designed to mount directly to the enclosure wall. The hide uses two N52 neodymium magnets for secure magnetic mounting.

Printed using Polymaker Panchroma Matte PLA in Sunrise Orange.

Graveyard Root Arch — Floor Piece
60 mm wide × 45.9 mm deep × 48.4 mm high

A twisted rooted arch designed as a freestanding ground feature for climbing, exploring, and creating depth within the Hollow Awakens scene.

Printed using MAKE PLA from Michaels.

Webkeeper’s Stump — Floor Piece
40.4 mm wide × 33.7 mm deep × 40 mm high

A compact weathered stump designed to complement the larger pieces without overwhelming smaller jumping spider enclosures.

Printed using SUNLU PLA+ Oak Wood.

Haunted Boundary Stone — Floor Piece
25.2 mm wide × 26.7 mm deep × 30 mm high

A small freestanding haunted marker that completes the graveyard-inspired scene.

Printed using MAKE PLA from Michaels.

HAND FINISHED BY A²

Every piece is individually hand painted using non-toxic acrylic paints to bring out the roots, bark, stonework, recesses, and other sculpted details.

After painting, each piece is sealed with Minwax Polycrylic protective finish to help protect the finished surface.

Because these pieces are individually printed and hand painted, minor differences in coloration, shading, and finish are normal. No two sets will be completely identical.

MATERIALS

• Polymaker Panchroma Matte PLA — Sunrise Orange
• SUNLU PLA+ Oak Wood
• MAKE PLA
• Non-toxic acrylic paints
• Minwax Polycrylic protective finish
• Two N52 neodymium magnets in the Jack-o’-Root Hide

DESIGNED AS A COMPLETE SET

The Hollow Awakens pieces were designed to work together rather than as unrelated individual decorations.

The Jack-o’-Root Hide mounts to the enclosure wall, leaving the enclosure floor available for the:

• Graveyard Root Arch
• Webkeeper’s Stump
• Haunted Boundary Stone

Together they create a coordinated spooky woodland/graveyard environment without requiring every piece to occupy the same level of the enclosure.

LIMITED RELEASE

The Hollow Awakens is a limited-release A² Spoody Hollow collection.

Once the available sets are gone, continued availability is not guaranteed.

PLA HEAT & HUMIDITY DISCLAIMER

These decorations are made primarily from PLA-based materials.

PLA can soften or deform when exposed to excessive heat. Keep these pieces away from heat lamps, direct heat sources, hot windows, or environments approaching or exceeding approximately 120°F / 49°C.

PLA décor is best suited for dry to moderate-humidity environments.

Prolonged exposure to very high humidity, constant condensation, standing water, or continuous wet conditions may affect the PLA material and protective finish over time.

Do not soak the pieces.

Clean gently as needed and avoid harsh cleaning chemicals.

PLEASE NOTE

• Includes all four Hollow Awakens pieces
• No substitutions or mix-and-match combinations
• Jack-o’-Root Hide is the only wall-mounted piece
• Graveyard Root Arch, Webkeeper’s Stump, and Haunted Boundary Stone are freestanding floor pieces
• Each set is individually 3D printed and hand painted
• Minor variations between sets are normal
• Enclosure, substrate, moss, animals, and other décor shown in photographs are not included unless specifically stated